Remove the header seal (61-63) and front bow seal (all), and replace if necessary or clean and re-use.If they are cracked or torn, you may want to replace them now. Measure and record the distance from the center of the back bow to the top edge of the package tray (58-66) or top of deck (55-57) as shown here.To get a replacement, especially if the weather is nice. You'd hate to rip the old cover off just to find out someone shipped you the wrong cover and you'll have to wait 2-3 weeks Lay the new cover on top of the old one while it is still attached just to make sure the new one looks like it will fit.If there are any problems, correct them now. It isn't binding or pinching the fabric anywhere, and that both sides go up or down evenly. Before you remove the old cover, run your top up and down a couple times and make sure.I use 1/4" staples on the front, and 3/8" staples on the back bowĪnd package tray strip, and I use 1/2" staples on the wire-on. Screws work the best for replacing the strip on the back bow. Screw or rivet the tacking strip to the package tray and header bow and usually Kanter is the place to get the new tacking strip.
Hydro-e-lectric also has all the hydraulic pumps, cylinders and hoses you may need. Here are a couple places to get your tops:
0 kommentar(er)
